Product Spotlight: Audison Speaker Upgrades for BMWs and Minis

BMW and Mini owners all over the globe have shown that there is a desire for a better sounding audio system in their vehicles. To meet the performance expectations of these discerning clients, Audison of Italy has developed six drop-in upgrades designed specifically for these vehicles. Best of all, the speaker and subwoofer upgrade solutions use factory wiring and mounting locations, so there are no modifications required. These are the perfect solution for leased vehicles!

Balancing Performance and Efficiency

Designing a loudspeaker requires that the engineer balance low-frequency and high-frequency extension with efficiency and output capability. For example, the upper midrange output may suffer if a driver is optimized to produce more bass. The engineers at Audison have optimized all these criteria for their Prima Series drivers to deliver amazing performance installations using small to moderately powerful amplifiers. As such, their BMW speakers are a perfect stand-alone upgrade with the factory radio or amplifier, or when used with a much more powerful solution like the 85-watts-per-channel AP F 8.9 bit DSP-equipped amplifier.

BMW Speaker Upgrade Solutions

The BMW speakers are broken into two categories: coaxial and component sets. So whether you have a new 2-series and want to upgrade the door speakers or are looking for the dash, front and rear speakers along with a subwoofer upgrade for a 2015 X5 with the Hi-Fi Sound system, there’s a solution from Audison.

The four speaker options are all based on the same basic platform. The 4-inch (100 mm) drivers feature high-quality rigid die-cast aluminum frames that include specific mounting provisions for the doors, the dash center channel or the rear parcel shelf of your BMW or Mini.

To deliver excellent efficiency, the drivers use neodymium magnets instead of conventional ceramic units. The woofer cones are constructed from pressed pulp paper to deliver an excellent balance of rigidity and damping characteristics. The cones are treated with a moisture-resistant finish to ensure their longevity in door installations. The woofers are driven by a large 1-inch (25 mm) fiberglass voice coil former. The large diameter of the coil contributes to the 40-watt continuous, 80-watt maximum power ratings for the drivers. Lastly, they all use a rubber surround instead of foam for an additional improvement in longevity.

The tweeters used in the coaxial and component set solutions once again feature neodymium magnets for excellent efficiency. The diaphragms are made of Audison’s Tetolon silk and cotton dome material to optimize rigidity and damping characteristics to prevent distortion. In the APBMW K4E and K4M component sets, the tweeters have a diameter of 29 mm. Most tweeters in this class, including these vehicles’ stock tweeters, are only 25 mm in size. The larger diameter allows for a nice, low resonant frequency and lower crossover points. The large diaphragm size also improves efficiency.

The component sets include the APBMW CXTM 1 passive filter networks for the tweeters. These filters include 0 and -3 dB output options, and OE-quality connectors are included for wiring. Angled mounting cups for the tweeters are included for rear parcel shelf installations. In the APBMW X4M and X4E coaxial speaker solutions, the tweeters use the same materials but have a diameter of 24 mm. Audison also offers the APBMW A4E accessory kit to allow for the unique installation applications of the F15 chassis X5, F16 chassis X6 and the G30 and G31 chassis 5-series sedans and wagons.

Audison BMW — The Audison APBMW K4E is a 4-inch midrange and 29 mm tweeter set designed specifically to bolt into your BMW or Mini with no modifications.

Prima Subwoofer for BMW and Mini Cars and SUVs

The APBMW S8-2 and APBMW S8-4 are 8-inch (200 mm) subwoofer solutions that are a direct drop-in replacement for the under-seat subwoofers found in BMW and Mini vehicles. These subwoofers feature graphite fiber-reinforced baskets with top-mounted neodymium motor structures. A pair of 5-millimeter polyurethane mounting gaskets are included to ensure a perfect seal with the factory enclosure. A 38 mm (1.5-inch) voice coil provides reliable performance at the speaker’s 150-watt power handling rating. The woofers’ cones are made from pressed pulp, and they use a rubber surround for longevity. A fabric cover over the face of the woofer cone prevents coins and rogue french fries from entering the speaker and causing buzzes or rattles. The woofers feature an Xmax specification of 7 mm in each direction for impressive output from the limited space and shallow mounting requirements.

The Audison engineers put some careful planning into the 2- and 4-ohm models. The 4-ohm S8-4 is slightly less sensitive than the 2-ohm model but offers a 40 Hz resonant frequency instead of 45, so it plays deeper. When the 4-ohm woofer is bridged onto a pair of channels from a Prima amplifier, the additional power allows it to play as loudly as the 2-ohm driver. If you plan a system that will use a larger subwoofer (10- or 12-inch) in the trunk or cargo area, the under-seat woofers function well as midbass drivers.

Visit Your Local Authorized Audison Dealer To Upgrade Your BMW Audio System

If your BMW or Mini sound system doesn’t give you goosebumps when you listen to it, drop by your local authorized Audison Retailer and ask about upgrading the speakers. The Product Specialist can design a solution that works with the existing source unit and amplifier or put together a Sound Pack solution with a dedicated DSP-equipped amplifier like the AP 8.9 bit. They can even create a bespoke solution for cars and SUVs that are equipped with fiber-optic MOST amplifiers. For more information about the Audison speaker upgrades available for your BMW or Mini, visit their website. Be sure to keep up with the latest news and product releases by following their Facebook page, Instagram feed and their YouTube channel.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

Modern Navigation Systems for Today’s Vehicles

Paper maps used to be the only way of planning route navigation. Before you, or perhaps your parents, set out on vacation, you would pick up maps for each state or province you planned to drive through, lay them out on the kitchen or dining room table, and highlight the route to take.

The problem with maps is that someone has to read them, and trying to read a map while driving is quite dangerous. Automakers realized that maybe technology could be used to make driving safer. This concept was the birth of the navigation system.

Through the 1980s, Toyota and Mazda worked on several different navigation systems for their cars. Some of these early navigation systems used digitized paper maps. In the 1990s, Mazda introduced the first GPS-based navigation system. Nowadays, most vehicles sold in North America have the option of navigation.

Navigation System Hardware

Modern navigation systems have four key components. The first is a computer. This computer runs the navigation software that plans the route you have requested, tells you when to turn and advises you when you arrive. The second key component is the maps used with the navigation software. Two companies offer these maps, which are licensed to the end-user. The third component is the GPS receiver module and antenna. The GPS receiver lets the navigation system know where you are, and where you are headed. Finally, there is an interface. The interface is usually a touchscreen of some kind. The interface displays the maps and accepts the input of information to plan the route. Information can be typed on a touchscreen or spoken to the software and converted to text.

What is GPS?

GPS stands for Global Positioning System. The U.S. Department of Defense created the technology in 1975 and it was fully functional by 1995. The purpose of the system was to provide accurate location, speed and altitude data anywhere on the planet. The GPS system comprises about 30 satellites that orbit the Earth. Each one transmits a uniquely coded signal with a very accurate time stamp. The GPS receiver can, once it has acquired signals from several satellites, triangulate its location by comparing the difference in arrival time of each signal. The GPS system most of us are used to is called Navstar, and it is operated and maintained by the U.S. Air Force Space Command.

Many consumers refer to a Portable Navigation System (PNS) or in-dash navigation system as a GPS. While this term has become accepted, GPS is just one key component of a navigation system.

Not surprisingly, there is more than one GPS system in use globally. Russia operates a system called GLONASS, India has IRNSS, the Chinese have BeiDou-2 and the Europeans have Galileo. Some GPS receivers can capture information from multiple systems to improve accuracy. An example would be a radio-controlled camera drone – these use GLONASS and Navstar to provide more resolution regarding their position.

The signal sent to the navigation computer by the navigation receiver includes the longitude, latitude, heading (the direction you are traveling), altitude, velocity and the current time.

What are Navigation Maps?

Knowing where you are on the planet is great. The real key to a navigation system is its maps. Maps are available from one of two companies: TomTom, which purchased TeleAtlas in 2007, and Nokia, which purchased Navteq in 2008.

Maps are databases of roads stored as vectors. A vector is a line between two points. In the case of navigation road maps, the end points of the lines (or roads) are GPS coordinates. Most navigation map information contains additional information such as house numbers. If you have every wondered why some house or building addresses are off by a little bit, the reason is based on how addresses are stored. At one end of a street, or section of road, the map data contains the beginning house number. The other end of the street has the ending house number. Navigation systems spread out the difference between the two house numbers evenly along the length of the street. This predicted location does not always match reality because of geography – or pure randomness, based on the whim of the local municipal building department.

Navigation systems are useless without maps. They couldn’t plan routes or give directions. You are, quite literally, at the mercy of the quality and accuracy of the maps you own.

Working in conjunction with the map database is a Points of Interest (also known as POI) database. A POI database contains information about businesses and landmarks, and often includes a phone number. Depending on your navigation system, you may have as few as 1.5 million points of interest or as many as 11 million. The manufacturer decides how much they are willing to spend on this information. If your navigation system can search for gas stations, hotels, restaurants or hospitals, then the map data includes a POI database.

Some of the very first navigation systems used analog tape to store map and POI data. Yes – analog, magnetic tape! From that point, we moved to CD-ROM, DVD-ROM, hard disk drives and flash memory. The latest systems are based on smartphones and don’t have the map data permanently stored onboard – it’s all downloaded over the air, using a cellular connection in real time.

Modern Navigation System Features

Modern navigation systems are amazing tools to help you travel safely and efficiently. These systems use extremely complex and proprietary algorithms to decide the best route between the starting and ending points of your route. The most basic of navigation software takes into consideration the size of the road (number of lanes and, if available, speed limit) and the direction of the turns you may have to make to complete the route. Navigation software companies are very protective of their route creation algorithms.

Modern navigation systems can accept real-time information to make route planning more accurate and efficient. The first upgrade was including traffic flow information. Many systems used FM antennae to capture traffic flow information that was broadcast in major urban areas. This technology is called RDS-TMC traffic, since the information was coded into the same frequency space as FM radio RDS information. Newer systems capture this traffic flow and accident information through the SiriusXM receiver. You do need a subscription to SiriusXM Traffic and, of course, supporting hardware in your vehicle to makes this work.

Apple CarPlay and Android Auto

If you have a vehicle with Apple CarPlay or Android Auto, your smartphone becomes an integral part of your navigation solution. Apple or Google stores map information and downloads it in real time through your smartphone’s data plan. The beauty of this solution is that you never, ever have to pay for map updates – the information is always being updated.

Apple Maps and Google Maps both offer turn-by-turn navigation solutions that use each brand’s advanced voice recognition software. All you have to do is press a button and ask the system to take you to an address.

CarPlay and Android Auto navigation has the benefit of being able to acquire Point of Interest information directly from the Internet. If a new company opens and registers itself with Apple and Google, you can search for it right away.

One drawback of CarPlay and Android Auto is that the maps aren’t stored on the phone or in the vehicle. If you are traveling to another country, your cellular provider will charge roaming fees. (You can get roaming data plans to help minimize the cost, so that’s not a huge deal, but it has to be considered before you buy.) Another consideration is that these systems are constantly downloading map information. If you happen to have a cellular data plan with very limited bandwidth, this could eventually cost some money in data overage charges. These are not show-stoppers, just considerations.

Google Waze

One very popular navigation application used by people who live in high-traffic areas like Los Angeles, Toronto, San Francisco, Seattle, Honolulu, New Orleans or Chicago is called Waze. This application is available for iPhone and Android phones for free. The beauty of Waze is that other users provide traffic flow information, including detours, accidents and warnings for potholes, weather or even animals on the road. Waze offers crowd-sourced traffic information at its finest. Google purchased Waze in June of 2013 for $1.3 billion. If you run the risk of getting stuck in a traffic jam, try Waze; it’s quite impressive.

Using any navigation solution has its perils. If your co-pilot is reading directions from a paper map, or you are trying to drive while listening to voice prompts from a navigation system, there is always the risk of making an error while turning, merging or exiting. Always be careful when navigating and heed the rules of the road at all times.

If you are in the market for a navigation solution for your vehicle, visit your local mobile electronics specialist. They have many different solutions depending on the vehicle you drive. Some systems replace the factory radio, some work with it and some operate separately from it. They can show you the options for your vehicle.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

What Is A Soundstage And Where Can I Buy One?

When it comes to listening to music, there seem to be two kinds of listeners in the context of “where the sound comes from.” Some people want to be enveloped by the music. They want to feel like they are in the very middle of the performance, with sound all around them. This style is sort of like listening to a set of headphones. The other listener wants their music to come from in front of them. This “forward-facing soundstage” style is more like listening to a home audio system or a movie theater.

There is no right or wrong – everyone has their preference. But high-end mobile audio systems are, for the most part, designed for the latter – people who want to feel as if they are sitting in the middle of the audience at an amazing concert.

There is also that guy in the Monte Carlo with the 6x9s in open-backed boxes in the rear window. He, thankfully, is gone now. If you happen to see him, cut off his mullet and drag him to a car stereo shop, please, and thanks!

Imagining a Soundstage

This article talks about an imaginary soundstage. But what in the world is a soundstage?

Imagine a band set up on a stage 20 feet in front of you. Let’s say there is a lead singer in the center of the stage, right at the forward edge. Behind him or her, someone is at a grand piano. To the right of the piano is a big drum kit with several cymbals all around the performer. In front of the drummer, to the right of the lead singer, is someone sitting on a stool with an upright bass. To the left of the singer is someone with a trombone. To the left of them is someone with a trumpet. Behind the trumpet player, to the left of the pianist, is a xylophone player. The xylophone player is also going to sing some backing vocals. So is the drummer.

Imagine those different positions for a second. They not only range laterally across the soundstage, but there is depth to their locations.

This unique and perhaps rare grouping of performers represents all the source aspects of your soundstage, but their locations don’t represent the limits of that stage. Let’s consider the venue in our analogy as well. A medium-size club of some sort. Wooden walls, a hard floor and a high ceiling. The room where we listen to our performance is a huge contributing factor to the sound of the performers. (If you ever have the chance to visit the Ryman Auditorium in Nashville, TN, do it! Even if you aren’t into country music, this venue is amazing.)

So, here we have our performers and our venue. We are going sit about 20 feet back from the center of the stage and let the show unfold for us. Our experience as the performers play defines the soundstage. We hear each instrument in its position on the soundstage. We also hear the sound of those instruments reflecting off the side walls of the club.

To reproduce the performance accurately, we need to reproduce those reflections as well. Capturing those reflections requires a specific recording style – so it may, or may not, happen. A recording of a live performance is much more likely to have that information than a studio recording.

Our Auditorium on the Road

There it is. The space in front of us, where the music is coming from, is our soundstage. If you get a chance to listen to your favorite recordings on a high-end home audio system, and you choose to sit equidistant from the speakers, then you probably have experienced a fairly accurate soundstage. The perceived location of where our music is coming from regarding height, width and depth is our soundstage.

Sadly, most mobile audio systems can’t or don’t recreate this very well. It’s a shame, because experiencing each performer in their correct location, including depth (one performer behind another) brings an amazing level of realism to your music. The good news: Recreating a soundstage in your car isn’t all that hard.

If you let the salesperson and installer at your local mobile electronics retailer know that you want a soundstage in your vehicle, they can design your system that way. Let’s assume we are building a whole new system from scratch, just to make this easier.

The first step will be to select a set of good-quality speakers for the front of your car. You mostly likely will want a component set unless you can fit a large (5-1/4” or larger) coaxial on the dash. Since most vehicles have the front speakers down low in the door, using a component set will let the shop you use install the tweeters up high and far forward. If the tweeters play low enough, say 2.5 kHz, then a skilled tuner can make the sound appear to come from the dash level, rather than the floor.

The next step to creating a soundstage is to have a way to tune those speakers. We aren’t talking about amplifier gain settings. We need control over equalization, output level and signal delay. Because the driver of the vehicle sits closer to the left speakers, those will appear to be louder, and we will hear the sound being reproduced by them sooner than the sound from the other side of the car. The simplest of systems with great soundstages will have either a source unit or external DSP unit with three-way crossovers, stereo equalizers and the ability to delay the signal going to each speaker.

With the above tools in place, your installer can set up the system so the sound coming from each speaker in the front of the car – from both midrange drivers and both tweeters – arrives at the listening position at the same time. Your installer will also tune the system so the left side of the car sounds the same as the right side. This tuning helps to eliminate frequency steering. Frequency steering causes the source location of a sound to move around the soundstage depending on frequency.

Next-level Performance

The above example offers a great two-way front stage. We would, of course, assume you are going to use a subwoofer in the system. A set of door speakers, even great ones, won’t be able to reproduce the bottom octave of the audio spectrum with any authority. With the sub in the system, it’s now called a three-way system. What if you want the system to sound even more realistic in terms of the placement of voices on the soundstage?

One way to improve your soundstage is to install a set of midrange drivers up high and far forward in the car. The A-pillars, dash speaker locations, and high and forward in the door are common midrange locations. If you can get a midrange that will play down to at least 300 Hz, the ability to solidify the dash as the source of the sound becomes much better. Rather than having deeper voices coming from lower in the door, now they will be focus better across the dash.

Another advantage of a three-way speaker set is that the woofer is often capable of producing slightly deeper midbass than an equivalent two-way speaker set.

The four-way system is going to cost more. You need two more speakers, two more amplifier channels, somewhere to mount those new speakers and probably another 30 to 60 minutes worth of system tuning. But yes, it’s totally worth it.

In these systems, the focus of performance is tailored to the driver’s seat alone. The passenger isn’t going to enjoy the same experience. That said, if you and your co-pilot both want to enjoy equally amazing audio, there are solutions in the works. By the spring or summer of 2017, everyone in the car will be able to enjoy an amazingly realistic soundstage across the dash.

This article provides an overview of the system design requirements for creating a system with a good soundstage. There are a lot of variables and hundreds, if not thousands, of options regarding how to execute to fine-tune the concept.

This is where your experienced mobile electronics retailer comes in. Use their knowledge, skill and experience to help bring your desire for musical realism to reality. If you’re out cruising around, drop into your local mobile electronics specialist retailer and ask if they have a demo vehicle that produces a great soundstage. If you have never experienced one, you will be blown away! Best Car Audio will not be held responsible for the ensuing audio addiction.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

DroneMobile Is the Best Car Sharing GPS Tracking Solution

Just as Uber and Lyft have changed the way we move around when we don’t have access to a vehicle, car sharing is changing how we rent vehicles. If you’re sharing your vehicle through Turo, Getaround, HyreCar or Outdoorsy and you’re looking for the best GPS tracking and control solutions, DroneMobile is an excellent choice. Being able to check your vehicle’s location at any time gives you peace of mind, and best of all, the system is reliable, accurate and easy to use. Let’s take a close look at the features and information that make DroneMobile the top choice for people who own car-sharing vehicles.

Precision Vehicle Location Information

DroneMobile can be added to your vehicle as a stand-alone tracking solution or an accessory to a security or remote car starter system. This telematics solution provides state-of-the-art LTE-based communication with a vehicle using the DroneMobile app on your Android or Apple smartphone or tablet, or via the web interface on a laptop or personal computer. One key element is that the hardware is completely invisible and can’t be easily disabled by the end user.

Car Sharing GPS — As soon as you launch the DroneMobile app, the system displays the location of your car or truck.

Locating and tracking your vehicle in case of an emergency is as easy as launching the app on your device or logging in to the website. In a second or two, you’ll know the exact location of your car or truck. You’ll be provided with the address where the vehicle is, and you can check its speed if it’s in motion. You can even use your Apple Watch or a WearOS device to check the vehicle location.

Instant Alerts Add Peace of Mind

The DroneMobile system does much more than report a vehicle’s location. You can configure alerts for vehicle speed, operating hours and excessive idling. If you want, you can receive a notification any time the ignition is turned on or off. DroneMobile monitors battery voltage and can send you a warning message if its low, so the person renting your vehicle will never be stranded. If you add DroneMobile to a security system, you’ll know when the alarm is triggered and what caused the alert.

The system pushes instant notifications directly to your smartphone. LTE communication (with 3G fallback) between the vehicle and blazing-fast servers means you get these alerts usually within two seconds, if not faster!

Detailed Information Makes Managing Your Rental Easy

If you choose the DroneMobile Premium Plus or Ultimate service package, you can see turn-by-turn details of where the vehicle has been driven. The data includes the total distance traveled and timestamps for stop and start locations and each turn made during the trip. If your car-sharing service uses per-mile billing, this information is perfect for invoicing.

Monitor Your Car-Sharing Vehicle with DroneMobile GPS

Renting out your vehicle can be stressful. DroneMobile helps to alleviate this stress by letting you monitor the vehicle usage, its security and location. More than 2,000 dealers across the United States and Canada are available to install DroneMobile in your vehicle. You can find one near you using the Dealer Locator on the DroneMobile website. Learn more about DroneMobile products by following them on Facebook, Instagram, Twitter or their YouTube channel.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

Product Spotlight: ARC Audio MOTO CX6 Motorcycle Speakers

ARC Audio has offered class-leading amplifier and speaker upgrade solutions for Harley-Davidson touring motorcycles for more than a decade. Their experience and obsession with sound quality have led them to create a new generation of high-performance speakers that balance output capability and efficiency, bass extension and accuracy. The latest evolution of their motorcycle and powersports speaker line is the new MOTO CX6 6.5-inch coaxial-style speaker set. Based on a totally reimagined design, these new speakers sound better, handle more power and shrug off water, dust and debris better than their predecessors. If that seems like too much to ask, you might be in for a surprise.

ARC Audio MOTO CX6 Basket and Motor Features

The MOTO CX6 is technically a component speaker set with the tweeter mounted on a bridge above the woofer. The benefit of this design is a significant increase in woofer cone area that improves efficiency and enhances low-frequency output capabilities. The elimination of the second weather-resistant surround around a coaxial pole piece provides an additional improvement in sound quality.

Motorcycle Speaker — The tweeter on the ARC Audio CX6 is suspended above the woofer to optimize midrange output efficiency.

The CX6 speakers are based on a custom-tooled, die-cast aluminum chassis design. The thick four-spoke basket features eight large cooling vents under the spider mounting plateau to help heat from the voice coil escape. The spider plateau was designed at the correct height above the top plate to eliminate the need for a cupped spider that would be detrimental to the speaker’s performance.

The speaker chassis includes four mounting holes, and thick foam gaskets are included on the rear of the basket to seal against the speaker pods found in newer Harley-Davidson Road Glide and Street Glide motorcycles. It’s worth noting, the significant excursion capability of the new woofer design, combined with the heavy-duty steel tweeter bridge, requires the use of Boom 2 bumped grilles or the forthcoming MOTO SG2014+ replacement grille kit.

The motor is based around a Y35A-grade ferrite magnet, and the top plate is CNC-cut hot rolled steel. The T-yoke features an integrated shorting ring. Most listeners will perceive this upgrade as delivering a smoother and more accurate midrange response. For those who are technically minded, the shorting ring helps prevent the current flowing through the voice coil from creating a secondary magnetic field in the motor that opposes the magnetic field created by the magnet. Did you follow that? Either way, it’s an important feature and one that offers audible performance benefits.

Cone and Suspension Components

The woofer cones are based on an injection-molded polypropylene doped with carbon to increase thermal stability and improve the damping characteristics. The upper edge of the cone is attached to the basket with an inverted low-shore rubber surround. A large dust cap covers the bond between the cone and the 1.25-inch glass fiber voice coil former. The large diameter of the voice coil helps to improve thermal power handling by increasing its total surface area. Likewise, the choice of a ferrite magnet allows it to act as a large-mass thermal heat sink to wick heat away from the voice coil assembly. The result is a speaker design that can easily handle eight hours at its full rated 110-watt power level.

The spider is made of Nomex and features a constant wave progressive design that prevents the assembly from bottoming out at extreme power levels. The spider, coil former and cone are bonded together with a high-temperature adhesive rated for over 230 degrees C (440+ F) to ensure reliability.

Cooling and power handling are improved thanks to a large-diameter voice coil and venting under the spider mounting plateau.

High-Performance Tweeter Delivers Amazing Clarity

The tweeter suspended above the woofer is based around a polyetherimide (PEI) and mylar dome damped with Norseal PVC mesh. This unique composite dome design is popular in pro audio compression drivers as it combines strength and damping with heat- and weather-resistance. The tweeter uses a copper voice coil wrapped around a composite Kapton mesh former, and a neodymium slug in the center of the voice coil serves as the motor. The effective diameter of the tweeter is 1 inch, and a hexagonal mesh grille protects it. A high-performance mylar capacitor affixed to the rear of the woofer basket serves as the crossover for the tweeter.

Upgrade Your Motorcycle or Powersports Vehicle with the ARC Audio MOTO CX6 Today!

As the first of their next-generation products, the MOTO CX6 replaces the current MOTO 602v2 product. While the 602s were great, the new technologies in the CX6 are worth the change. If you’re searching for a motorcycle speaker that sounds realistic and offers impressive midbass performance while still getting loud, drop by your local authorized ARC Audio retailer and ask about the new MOTO CX6. Be sure to keep up with the latest product releases from ARC Audio by visiting their website, Facebook page, Instagram page and YouTube channel.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

Product Spotlight: Audison Speaker Upgrades for BMWs and Minis

Balancing Performance and Efficiency

BMW Speaker Upgrade Solutions

Prima Subwoofer for BMW and Mini Cars and SUVs

Visit Your Local Authorized Audison Dealer To Upgrade Your BMW Audio System

Modern Navigation Systems for Today’s Vehicles

Navigation System Hardware

What is GPS?

What are Navigation Maps?

Modern Navigation System Features

Apple CarPlay and Android Auto

Google Waze

What Is A Soundstage And Where Can I Buy One?

Imagining a Soundstage

Our Auditorium on the Road

Next-level Performance

DroneMobile Is the Best Car Sharing GPS Tracking Solution

Precision Vehicle Location Information

Instant Alerts Add Peace of Mind

Detailed Information Makes Managing Your Rental Easy

Monitor Your Car-Sharing Vehicle with DroneMobile GPS

Product Spotlight: ARC Audio MOTO CX6 Motorcycle Speakers

ARC Audio MOTO CX6 Basket and Motor Features

Cone and Suspension Components

High-Performance Tweeter Delivers Amazing Clarity

Upgrade Your Motorcycle or Powersports Vehicle with the ARC Audio MOTO CX6 Today!

Testimonials

Very Friendly Staff

I recommend then to everyone!

Will be going back for sure!

Subscribe to Our Website

Location

Connect With Us

Services

Hours