It’s been over a year since Sony launched their first Mobile ES subwoofer – the XS-W104ES. The big brothers to this amazing driver are now available in the form of the 12-inch XS-W124ES and XS-W122ES drivers. Rated to handle 500 watts of power and designed to sound great in either sealed or vented enclosures, these are a perfect solution for those who want an audio system that delivers impressive bass.

Design and Performance-Enhancing Features

The XS-W124ES and XS-W122ES are the same drivers, except for the 4- and 2-ohm voice coil impedance options. These subwoofers are based on a heavy-gauge, five-beam, stamped-steel basket concealed behind a custom-tooled shroud. The shroud forces air from under the spider mounting plateau down across the magnet and out of the bottom of the speaker in what Sony calls their Dynamic Air Diffuser design. There’s a custom trim ring around the mounting ledge to conceal the hardware and give the driver a clean, tidy look once installed.

Like all the speakers and subwoofers in the Mobile ES Series, these 12-inch drivers use Sony’s Lightweight Rigid Cellular woofer cone. The cone design balances rigidity, mass and resonance damping to ensure that unwanted harmonic distortion isn’t added to the audio signal. Sony notes that their LRC cones are 10 times as rigid as conventional injection-molded polypropylene speaker cones. The cone is attached to the outer edge of the basket with Sony’s proprietary Separated Notch Edge Surround. This rubber surround includes angled notches that allow it to stretch and compress smoothly to improve linearity at high volume levels. The notches also prevent the surround itself from resonating and coloring the music produced by the driver. Finally, a rigid inverted dust cap in the center of the cone keeps debris out of the voice coil.

The Sony XS-W124ES and SX-W122ES drivers use two progressive-rate spiders to deliver excellent efficiency and appropriate damping at high excursion levels. The tinsel leads are sewn to the upper spider for quiet and reliable operation. The terminals will accept cables up to 10-AWG in size for efficient power transfer from your amplifier.

Sony rates these subwoofers as capable of handling 500 watts of continuous power in compliance with the CTA-2031 standard. Using the older IEC 60268-5 standard, the continuous power rating is 400 watts. Peak power is listed as being 2,000 watts.

Sony Mobile ES Car Audio Subwoofer Applications

Sony suggests that these subwoofers can be used in sealed enclosures with an internal volume of 0.84 cubic foot. In this application, the Qtc is up around 1.0 and the F3 is about 45 Hz from either model. For those craving serious low-frequency output, the suggested 1.34- or 1.6-cubic-foot enclosures from the owner’s manuals both deliver a boost in output of just over 6 dB. That means a single driver in a vented enclosure will play louder than two drivers in a sealed enclosure at all frequencies above 20 Hz. If you have room for the vented design – we highly recommend going that route.

Not surprisingly, these woofers are well-matched to the power production capabilities of the new Mobile ES amplifiers. A pair of XS-W124ES subwoofers wired in parallel is ideal for the XM-1ES monoblock. You could also use these with the 750-watt subwoofer channel on the XM-5ES five-channel system amplifier.

Experience the Elevated Standard of Car Audio with Sony Mobile ES

When the time comes to add deep and accurate bass to your car audio system, visit your local authorized Sony Mobile ES retailer and ask for a demonstration of the XS-W124ES or XS-W122ES 12-inch subwoofers. We know you’ll be impressed. To learn more about Sony Mobile ES and the rest of its impressive products, follow Sony Car Audio on Facebook.
This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

Hundreds of audio-video receiver options are available to upgrade your car’s or truck’s entertainment system. Selecting one that’s easy to use, reliable and sounds great is no easy task. The car audio team at Sony has combined the most sought-after features with state-of-the-art technologies to create the XAV-AX6000 digital media receiver. This radio includes wireless Apple CarPlay and both wired and wireless Android Auto, so your smartphone’s voice recognition and internet-connected features become a crucial part of providing you with the information and entertainment you want while driving.

Sony XAV-AX6000 Source Information

Most owners will connect their Sony XAV-AX6000 to their Android or Apple phone using Android Auto or Apple CarPlay to stream music from Pandora, Spotify, iHeartRadio or Tidal. You’ll also have the option of playing music files stored directly on the phone, which can be accessed using simple voice commands. Both Apple and Android-based phones can connect wirelessly to the radio using a Wi-Fi connection, so there are no cords or cables to worry about each time you get in or out of the vehicle. You can also use these smartphone connectivity solutions to get detailed, turn-by-turn navigation directions to almost any address, business or landmark in North America using Google, Waze or Apple maps. Both systems allow you to check your schedule, make phone calls, listen to incoming text messages and dictate a reply – all while keeping your eyes on the road and your hands on the steering wheel.

The XAV-AX6000 includes an AM/FM receiver with RDBS station information display. Users can connect a USB mass storage class device to play MP3, WMA, ACC, FLAC, WAV, ALAC or DSF/DSDIFF audio files with sampling rates up to 768 kHz (depending on the file format). The USB-C port on the rear of the chassis provides up to 3 amps of current to recharge your smartphone efficiently when connected. The XAV-AX6000 also has a micro-HDMI port on the back of the chassis so that you can connect a smartphone, computer or game system to the radio as an external multimedia source. Bluetooth audio streaming with support for high-resolution LDAC is built into the radio to maximize the sound quality of wireless audio playback on supported devices.

Connectivity and Control Options

The XAV-AX6000 features a 6.95-inch display with a capacitive-touch interface. The screen assembly is integrated into a bezel-less design that looks as though it belongs in the dash of your car, truck or SUV. A set of six hard buttons is included at the bottom of the screen to make volume, source selection, track selection and voice recognition activation easy without having to look at the radio.

In terms of audio features, the radio has a 20-watt-per-channel amplifier built in and can be connected to external amplifiers using the 5-volt front, rear and subwoofer preamp outputs. The XAV-AX6000, the XAV-AX4000 and the XAV-9500ES offer high- and low-pass filters on all four channels with slopes that are adjustable from -12 to -48 dB/octave. Your installer can fine-tune the installation with the five-channel time alignment settings and the 14-band graphic equalizer. Many users will appreciate the ability to change the background wallpaper to a JPEG image from a USB memory stick.

A backup camera input is also included to make it easy to see everything behind your vehicle while parking or maneuvering. The backup camera image will display automatically when the transmission is in reverse or can be selected manually from the source menu if you need to check on a trailer.

Sony has included support for the iDatalink Maestro RR and RR2 integration system. These modules allow the radio to talk to the computer network in your car to display information like engine speed, vehicle speed, coolant temperature and much more. Select applications include information like tire pressure, battery voltage and even climate control adjustment. Check with your local Sony retailer to learn more about your vehicle’s Maestro compatibility and features.

Upgrade Your Entertainment System with Sony

If you’re looking for a new radio to upgrade the sound quality, features and technology in your car, truck or SUV, drop by a local authorized Sony retailer and ask about the XAV-AX6000. Be sure to bring your smartphone to experience how intuitive and responsive the system is. To learn more about Sony car audio products, check out the Sony Car and Marine Audio website. You can also follow Sony on Facebook, Instagram and YouTube to keep up with their latest product releases and new information.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

Over the last few years, Sony’s multimedia receivers have become increasingly popular. As more units have sold, retailers have asked for iDatalink Maestro integration, USB-C support and powerful sound customization. With Sony’s new XAV-AX4000, those requests and more have been fulfilled. Let’s look at what this sleek and impressive car audio source unit offers.

Clean Cosmetics and Intuitive Technology

The first thing you’ll notice about the XAV-AX4000 is that it still looks great in the dash of your car or truck, and the user interface is as intuitive as it gets. Anyone can easily select source options or adjust settings without needing to read the owner’s manual. The icons on the screen can be expanded by selecting the “All Apps” icon on the screen and can be rearranged to create a layout that gives you quick access to the elements you choose on the home screen.

The 6.95-inch touchscreen display has a resolution of 800 by 480 pixels with a brightness of 600 Cd/m2. Four physical control buttons along the bottom of the screen make it easy to access the main menu, adjust the volume, change tracks or activate voice recognition features.

The radio includes wireless Apple CarPlay and wired and wireless Android Auto connectivity. Start your car, and the phone will connect automatically so you can make phone calls, send texts or get navigation directions from Google Maps or Waze. Of course, you can use your favorite streaming services like Pandora, Spotify, iHeartRadio or Apple Music to be entertained while you drive. A USB-C port on the rear of the chassis can be used with a USB mass storage device to play MP3, WMA, AAC, FLAC, WAV, ALAC, DSF or DSDIFF audio files.

You can also use the USB-C port to charge your phone with up to 3 amps of current. The XAV-AX4000 supports the LDAC codec with Android smartphones for those wanting excellent Bluetooth streaming audio quality. Of course, the radio includes an AM/FM receiver with RDS information display.

Audio Features Add Realism to Your Music

The XAV-AX4000 includes a 14-band graphic equalizer, front, rear and subwoofer signal delay setting adjustments and adjustable three-zone high- and low-pass crossovers so your installer can fine-tune your system to deliver excellent sound and detail. The preamp outputs are rated to provide up to 2 volts of output, and the built-in four-channel amp is good for 20 watts of power in compliance with the CTA-2006 standard.

iDatalink Maestro Integration

One of the most sought-after upgrades to the XAV-AX4000 is the inclusion of support for the iDatalink Maestro RR and RR2 integration modules. These interfaces will allow the radio to communicate with certain vehicles to provide steering wheel control, backup camera and auxiliary input connectivity. You can display vehicle information such as engine speed, vehicle speed, battery voltage or engine load on the dashboard display and check tire pressures and battery voltage on another. Many vehicles allow the Maestro interface to provide access to climate control adjustments. Your Sony retailer can let you know about the features that are compatible with your make, model and year of car or truck.

Installer- and User-Friendly Design

From an installation standpoint, the single-DIN chassis behind the double-DIN display dramatically simplifies installation. The radio includes an external Bluetooth microphone to deliver excellent outgoing audio quality. Another new feature is selectable and user-uploadable background wallpapers to match your vehicle interior or your mood.

The radio also includes a rear-view camera input with automatic reverse triggering, and the Maestro will include factory parking lines and sensor data in some vehicles. Finally, Sony has designed the XAV-AX4000 to wake up quickly, so your music starts playing when you are ready to go.

Experience the Sony XAV-AX4000 Today!

If it’s time to upgrade the technology in your car or truck, drop by an authorized Sony retailer today and ask for a demonstration of the new XAV-AX4000 multimedia receiver. We’re sure you’ll be impressed by its performance, features, appearance and intuitive interface. You can find a Sony retailer using the dealer locator on the Sony Car Audio website. Be sure to subscribe to Sony’s YouTube channel and follow them on Facebook and Instagram to be the first to learn about their latest car audio product releases.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

The addition of amplifiers to Sony’s Mobile ES line means that every component in a premium car audio system can come from this prestigious series. Our second amplifier spotlight focuses on the compact and powerful XM-4ES four-channel amplifier. Let’s see what Sony’s development team has created!

Sony Mobile ES XM-4ES Amplifier Specifications

The XM-4ES can drive four 2- or 4-ohm loads in its stereo configuration. Each pair of channels can be bridged to drive a single 4-ohm speaker or subwoofer with significantly more power. This bridged configuration is common in systems with a pair of front component speakers and a single subwoofer in the trunk or cargo area.

By way of power specifications, Sony rates this amp as capable of producing a beefy 100 watts per channel with 4-ohm drivers. That power increases to 165 watts when driving 2-ohm loads. When a pair of channels are bridged, the amp will produce 330 watts into a single 4-ohm load. As we’ve come to expect from a no-nonsense company like Sony, all specifications are compliant with the CTA-2006-C standard for supply voltage, noise and distortion content. The power ratings contain less than 1% total harmonic distortion and noise and are measured with 14.4 volts supplied to the amplifier. The CTA-compliant signal-to-noise ratio is 77 dB, and harmonic distortion is rated as less than 0.05%. Finally, the frequency response is very wide at 10 Hz to 40 kHz. On paper, everything looks excellent.

XM-4ES Features and Design

The chassis of the XM-4ES is the same high-mass 10.63-inch wide, 8.46-inch deep, 2.36-inch tall cast-aluminum heatsink as used on the XM-1ES monoblock we spotlighted recently. All signal, power and speaker connections are made along the front edge of the amp, and all but one of the controls are concealed under a removable panel on top of the amp. It’s worth noting that the center trim panel on top of the amp can be rotated 180 degrees, so the Mobile ES logo is aligned with the amplifier’s orientation in your installation.

The front edge features three beefy terminal blocks with heavy-duty set screws accessible from the top of the amp. The right-hand block will accept four-AWG power and ground wires and the remote turn-on lead. The two center blocks are for the speaker output connections, and they will take 10-AWG speaker cables without fuss. A pair of 40-amp ATC fuses to the left of the power block protect the amp.

On the far left of the end panel is a switch that your installer can use to select between low- and high-input voltages. This indicates that the amp has differential inputs – a feature that should be on all car audio amplifiers. Three pair of RCA jacks are present. Two pair are inputs (one RCA for each amplification channel), and the third is an output that could feed a subwoofer amp.

On top of the amp, two groups of controls are mimicked for each pair of channels. These include input sensitivity, filter function, filter range and both high- and low-pass adjustments. Without getting into too much, it’s worth noting that each pair of channels can operate in full-range, high-pass, low-pass or bandpass filter configurations. The amp also includes remote or a signal sense turn-on detection that can be used in high-level input mode, which is crucial for integration with factory-installed source units. There are also switches for signal summing and line-out mode selections. We have a Test Drive Review planned for this amp in a few months. We’ll cover the details of each control then.

Chassis and Electronic Design

As mentioned in the XM-1ES spotlight, Sony has put extra attention into the design of the amplifier chassis to help reduce resonance and vibration that could deteriorate sound quality and accelerate wear and tear. That’s something I haven’t seen any other manufacturer focus on.

Internally, the amplifier is based on two circuit boards. The main board is home to the power supply and output stage. High-quality, high-tolerance surface-mount components are used wherever possible. The output filter chokes are shielded units that help to reduce electromagnetic interference. The second circuit board stands vertically and has all the signal processing controls and switches. In all, the design is modern and well-organized.

Check Out the Sony XM-4ES at Your Local Authorized Sony Retailer

We’re excited to get our hands on the XM-4ES to give it a listen and run it through its paces on the TestDriveReview bench. Until then, you can learn more about this amp and its monoblock and five-channel brethren by visiting the Sony Mobile ES website or a local authorized Mobile ES retailer. Be sure to subscribe to Sony’s YouTube channel and follow them on Facebook and Instagram to be the first to learn about their latest car audio product releases.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

The team here at BestCarAudio.com has been privileged to follow the introduction of new, high-performance car audio components in the Sony Mobile ES line. From their impressive speakers and subwoofers to the genuinely outstanding XAV-9500ES source unit, each solution has delivered exceptional performance and value. For 2022, Sony has added three amplifiers to the Mobile ES line. The first model we’ll spotlight is the XM-1ES monoblock subwoofer amplifier. Let’s dig in!

Sony Mobile ES XM-1ES Amplifier Specifications

The XM-1ES is a monoblock car audio amplifier designed to power subwoofers with up to 1,000 watts of power. Specifically, Sony rates the amp as capable of producing 600 watts of power into a 4-ohm load with specifications that fall under the CTA-2006-C guidelines for noise, distortion and supply voltage. When driving a 2-ohm load, power output increases to 1,000 watts while remaining under the 1% THD+N limit. Sony specs the distortion as being 0.05% or less at 100 Hz. Though it’s uber-geeky, I’m happy to see that the 77 dB signal-to-noise ratio specification is also CTA-compliant. Everyone at BestCarAudio.com is fanatical about proper specification qualifications, and Sony isn’t playing any games in this regard.

The amplifier measures 10.63 inches wide, 8.46 inches deep and 2.36 inches tall. This is small enough to fit under the front seats of many vehicles or in a storage compartment under the floor of a cargo area. Sony has done something unique with the chassis and bottom-plate design of the XM-1ES that I’ve never seen from any other amplifier manufacturer. The high-mass cast-aluminum extrusion has been optimized for a resonant frequency that is well out of the region where most of the vibration energy from the vehicle and subwoofer system occurs. This will contribute to product reliability and could easily improve the amplifier’s sonic performance. It’s also worth noting that the center trim panel on the top of the amp can be rotated 180 degrees, so the Mobile ES logo aligns cosmetically with your installation. This is impressive attention to detail.

In terms of electrical connections, all signal, power and speaker terminals are along the front edge of the amplifier. All the speaker and power connections are made via heavy-duty terminal blocks with hex-head set screws accessible from the top of the amp. Even better, the same size hex key is used for every screw on the amplifier, from the top trim cover to the beefy 1/0 gauge power terminals. Fuses, the connection for the very handsome remote level control and an input voltage selection switch round out the end panel features.

Removing two screws on top of the amp gives your installer access to the amplifier’s configuration settings and controls. RCA input jacks will accept 0.2 to 8V in low-voltage mode and 3 to 16 volts in high-level mode. This switch implies that the inputs on the amp feature a differential design that will help eliminate the presence of induced noise. The low-pass crossover is adjustable from 50 to 500 Hz and has a slope of -24 dB/octave.

The XM-1ES has remote signal detection turn-on capabilities when using the high-level input setting, so it can be used with a factory source unit without needing external hardware in most applications. The infrasonic filter is adjustable from 5 to 50 hertz with the same attenuation rate.

A look inside the amp shows a modern design, using surface-mount components almost exclusively. Surface-mount parts, which can be placed on the board robotically instead of by hand, offer exponentially better value to consumers. These parts also typically offer higher precision than their through-hole brethren. High-quality capacitors, shielded output filter chokes, lots of energy storage and good input filtering are clearly evident.

A small variable-speed fan in the back left corner helps ensure that the amp will continue to function reliably, even when installed in a space with limited ventilation. This durability is part of why Sony can back its Mobile ES amplifiers with a three-year manufacturer’s warranty.

Check Out the Sony XM-1ES at Your Local Authorized Sony Retailer

We plan to get one of the new Sony XM-1ES amplifiers to our lab for a full BestCarAudio.com Test Drive Review shortly. If you’re shopping for a high-quality, full-featured subwoofer amplifier for your vehicle, visit your local authorized Sony Mobile ES retailer. You can learn more about this amp and its two brethren (the XM-4ES four-channel and XM-5ES five-channel) by visiting the Sony Mobile ES website, their Facebook page, Instagram feed or YouTube channel.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.